|Material:||Nickel 80%, Chromium 20%||Surface:||Bright/Smooth|
|Package:||Spool/coil, In Customers' Requirement||Weight/Spool:||5kg|
nichrome resistance wire
0.02mm-10mm Nichrome Alloy NiCr8020 Electric Heating Wire for Toaster Ovens
Brife Introduction of Nichrome Alloy NiCr8020 Wire:
Ni80Cr20 ,also called Nikrothal 8,MWS-650,NiCrA,Tophet A,HAI-NiCr 80,Chromel A,Alloy A,N8,Resistohm 80, Stablohm 650,Nichorme V,Nikrothal 80 etc. It has high resistivity, good anti-oxidation properties, high temperature strength, very good form stability and weld ability. It is widely used in electrical heating element material, resistor, industrial furnaces, etc.
|0.03||0.02||0.015||0.60||0.75~1.60||20.0~23.0||Bal.||Max 0.50||Max 1.0||-|
|Max Continuous Service Temperature:||1200ºC|
|Resisivity 20ºC:||1.09 ohm mm2/m|
|Thermal Conductivity:||60.3 KJ/m·h·ºC|
|Coefficient of Thermal Expansion:||18 α×10-6/ºC|
Common size of the Wire:
(1)Bright Wire: 0.02mm-3mm
(2)Pickling Wire: 1.8mm-10mm
(3)Oxidized Wire: 0.6mm-10mm
(4)Flat Wire: (T): 0.05mm-1.0mm, (W): 0.5mm-5.0mm
Package of the Wire:
Wire twined on the spool, film covered on the wire
Shipping by sea, by aire, by express:
|Destination||By sea||By air||By express|
|Southeast Asia||7-9 days||2-3 days|
|The Middle East||20-25 days||3-5 days||3-5 days|
|India-Pakistan||15-22 days||3-5 days||3-5 days|
|Mediterranean||28-30 days||3-5 days||3-5 days|
|Europe||28-35 days||3-5 days||3-5 days|
|Africa||40-45 days||about 7 days||about 7 days|
|Australia||18-32 days||3-5 days||3-5 days|
|West of America||12-15 days||3-5 days||3-5 days|
|East of America||25-35 days||3-5 days||3-5 days|
|Middle and South America||30-55 days||about 7 days||about 7 days|
Series of Nichrome Alloy Wire:
Ni80Cr20, Ni70Cr30, Ni60Cr40, Ni60Cr23, Ni60Cr15, Ni35Cr20,
Packing & Shipping:
(1)In spool--when the diameter≤1.2mm
(2)In coil--when the diameter>1.2mm
(3)All the wire packd into cartons→cartons packed into plywood pallet OR wooden case
Delivery-When the pre-payment is confirmed:
(1)The requested products are in stock,we will send them out within 3 day
(2)The raw material is in stock,we will send out the products within 10 days.
(3)When we need to re-melt the material,it will take 20-25 days to send the products
(1)Offer OEM service;
(2)Test report will be sent accompanying the products;
(3)Adding metal elements according to the standard of different countries as per the user's requirements.
Q1:What is the MOQ?
A1:Any quantity you need when the sizes are in stock.
Wire diameter<0.1mm,it is 1kgs
Wire diameter 0.1~0.3mm,it is 2~3kgs
Wire diameter 0.3~0.7mm,it is 5kgs
Wire diameter 0.7-1.2mm,it is 10kgs
Wire diameter >1.2mm,it is 20-25kgs
For strip,smaller size,it is 10-20kgs
Larger size,it is 50-100kgs
Q2:Can you offer free samples?
A2:Yes,when the same sizes or the close sizes are in stock.But the customers must bear the freight of the samples.
Q3:What's the payment terms?
A3:We accept T/T,L/C,Paypal etc.It can be negotiated when the amount is different.
Q4:What is the standard of the material?
A4:Nichrome alloy is supplied according to Chinese standard GB/T 1234-2012.But We can add metal elements according to the standard of different countries as per the user's requirements.
Q5:Are you trading company or manufacturer?
A5:We are factory.And we welcome your visiting.
Contact Person: tankii