|
Product Details:
|
| Material: | Nickel Alloy | Model: | 45 CT |
|---|---|---|---|
| Dimensions: | 1.6mm & 2.0mm | Chemical Composition: | Cr45%, Ni+Ti55% |
| Usage: | Supersonic Arc Spraying | ||
| High Light: | heating resistance wire,high heat wire |
||
45CT flame spray wire NiCrTi/45CT thermal spray wire Ni-Cr Alloy arc spray wire
Introduction:
NiCrTi/45CT wire is a Nickel/Chrome/Titanium wire developed specifically for boiler applications. This second generation material replaces 06BXP and produces coatings which are extremely resistant to corrosive vanadium and sulfur gases in boiler atmospheres.
Typical Uses and Applications:
This material has proven very effective in providing long term protection to boiler tubes against high temperature sulfidation. The wrought material is highly resistant to sulfur/vanadium atmospheres up to 1800°F. Wrought material of this type has shown a 2 mil per year corrosion rate over a nine year period when used in the super heater section of boilers. Coatings of 45CT wire applied to boiler tubes have shown virtually no loss of thickness or spalling after 24 months of service (as of this writing).
Product Details
Chemical composition:
Nominal composition |
Cr% |
Ni +Ti% |
Min |
45 |
/ |
Max |
/ |
Bal. |
Mechanical Properties
| Coating Hardness | HRC 30-35 |
| Bonding Strength | 48.26 N/mm2 |
| Deposit Rate | 10 lbs/hr/100A |
| Condition | Solid Wire |
| Diameter | 1.6mm(14 ga),2.0mm,3.175mm |
| Package Size | 10kg,15kg,or up to client’s demand |
Contact Person: Mr. Martin Lee
Tel: +86 150 0000 2421
Fax: 86-21-56116916
