Product Details
Place of Origin: Chian
Brand Name: Tankii
Certification: ISO RoHS AISI ASTM GB
Model Number: 0cr13al4,alloy 750 stablohm 750,0cr23al5,0cr25al5,, 0cr15al5, 0cr20al5,0cr21al6
Payment & Shipping Terms
Minimum Order Quantity: 20Kg
Price: USD 20/Kg
Packaging Details: Wooden Pallet, Wooden Case, Spool
Delivery Time: 10-15 woking days
Payment Terms: L/C, T/T, Western Union
Supply Ability: 200Tons/Month
Packing: |
Case |
Craft: |
Cold Rolled |
Characteristics: |
High Resistivity, Good Oxidation Resistance |
Sample: |
Free |
Shape: |
Strip/Wire/Ribbon/Pipe/Sheet/Bar/Foil |
Surface: |
Bright |
The Highest Use Temperature: |
250c |
Density: |
8.9 |
Resisivity: |
0.15 |
Packing: |
Case |
Craft: |
Cold Rolled |
Characteristics: |
High Resistivity, Good Oxidation Resistance |
Sample: |
Free |
Shape: |
Strip/Wire/Ribbon/Pipe/Sheet/Bar/Foil |
Surface: |
Bright |
The Highest Use Temperature: |
250c |
Density: |
8.9 |
Resisivity: |
0.15 |
Copper based low resistance heating alloys
The copper-based low resistance heating alloy is widely used in low-voltage circuit breaker, thermal overload relay, and other low-voltage electrical product. It is one of the key materials of the low-voltage electrical products. The materials produced by our company have the characteristics of good resistance consistency and superior stability. We can supply all kinds of round wire, flat and sheet materials.
Round wire: diameter 0.020mm-10.0mm
Flat wire: thickness 0.025mm-4.0mm, width 0.040mm-4.0mm
Characteristic | Resistivity ( 200C μ Ω . m) | Max. working Temperature ( 0C) | Tensile Strength (Mpa) | Melting point (0C) | Density ( g/cm3) | TCR x10-6/ 0C (20~600 0C) | EMF vs Cu (μ V/ 0C) (0~100 0C) |
Alloy Nomenclature | |||||||
NC035(CuNi30) | 0.35± 5% | 300 | 350 | 1150 | 8.9 | < 16 | -34 |
Mechanical Properties | Metric | Comments |
Tensile Strength, Ultimate | 372 - 517 MPa | |
Tensile Strength, Yield | 88.0 - 483 MPa | Depending on temper |
Elongation at Break | 45.0 % | in 381 mm. |
Modulus of Elasticity | 150 GPa | |
Poissons Ratio | 0.320 | Calculated |
Charpy Impact | 107 J | |
Machinability | 20 % | UNS C36000 (free-cutting brass) = 100% |
Shear Modulus | 57.0 GPa |